The kit in question includes the 10kWh battery, a 10 kW hybrid single-phase inverter with integrated smart meter and a 5kW set with 24 photovoltaic modules of 410W each.

V-TAC 9.6kWh Lithium Storage Battery Integrated BMS Wall/Rack Mounting for Photovoltaic Inverters (48V 200Ah).

• There Lithium battery , 48V 200Ah, for Photovoltaic Inverters allows you to accumulate electrical current up to a capacity of 9.6kWh ;
• It has a 5-year warranty and a long life: > 6000 cycles charging/discharging;
• To increase the capacity of the photovoltaic system it is possible to connect up to 16 batteries in parallel for each inverter , compatibly with the inverter nameplate data;
• This battery is suitable for being anchored to the wall or contained inside a Rack cabinet ;
  
• The product is certified with the declaration of conformity to the CEI 0-21 standard;
• Here you can find the product data sheet .

V-TAC Set 5kW (4.92 kW) with 12 Monocrystalline Photovoltaic Solar Panels 410W 1722*1134*35mm.

• V-CT it's a 5kW photovoltaic set (4.92kW) containing 12 monocrystalline photovoltaic modules of power 410W and dimensions 1722*1134*35mm . The nominal power per surface is equal to 210W/m² ;
• This model has the silver colored frame and a thickness of 30mm;
• The set is packaged in a wooden crate closed on all sides and therefore represents an excellent solution for transporting photovoltaic solar panels to the construction site ;
• Inside each photovoltaic solar panel there are photovoltaic cells capable of transforming solar energy into electricity, thanks to the photovoltaic effect . These modules are made with innovative half cells . Each cell is 182x91mm in size and is equipped with 10 busbars . On each module there are 108 cells arranged in an 18x6 matrix. The cells are made with the highest performing German technology, even in low light conditions, with a heat self-reduction system that prevents energy loss;
• The thermal coefficient of the photovoltaic module is -0.35%/°C , compared to a temperature of 25°C. This means that if the photovoltaic panel works for example at 35°C, the yield loss in terms of power will be equal to 3.5%;
• Tüv NORD certified. IP67/IP68 junction box with 3 diodes, 2 output cables 1 meter long (100cm) 4mm² with MC4 connector, anodized aluminum frame, Wind/Snow : 2400Pa/5400Pa. Module efficiency equal to 20.97%. 25 year warranty on 85% manufacturability, linear efficiency;
• The photovoltaic modules can be connected in series (the voltage is added) or in parallel (the current is added), based on the needs and maximum values ​​sustainable by the MPPT charge controller: see maximum input voltage and current for each MPPT, reported on the technical sheet of the hybrid or network photovoltaic inverter ;
• Here you can find the product technical data sheet .

V-TAC Deye Three-Phase Hybrid On-Grid/Off-Grid Photovoltaic Inverter 10kW CEI 0-21 with Color LCD Touch Screen and Integrated Smart Meter including CT and WiFi 5 Year IP65 Warranty.

• The Hybrid Inverter V-TAC Three-Phase 10kW Double MPPT , is an electronic device that allows you to convert the direct current supplied by photovoltaic solar panels into alternating current, with single-phase output suitable for consumption in homes or commercial premises. This inverter has it Integrated Smart Meter for current measurement: does not require an additional Smart Meter;
• It comes complete with accessories : Current Transformer (CT), 2 pairs of MC4 Solar Connectors, RJ45 Cable and WiFi Module for remote monitoring;
• It is equipped with a screen Color LCD touch screen which allows you to interact with the settings. Function Zero Emission integrated. Heat dissipation occurs via radiators, thus ensuring low noise. Equipped with charge/discharge protection. The degree of protection is IP65, so it is can also be used for outdoor use , even under prolonged rain;
• The warranty on this inverter model is 5 years;
• The product is certificate with the declaration of conformity to the standard CEI 0-21 ;
• Here you can find the product technical data sheet .

Advantages of a Hybrid Inverter:

This inverter is defined hybrid as it can work both connected (On-Grid, "on the Net") how disconnected (Off-Grid, "Island") from the electricity grid . The hybrid inverter provides as an option the possibility to connect the appropriate ones storage batteries .
The choice of a hybrid inverter is optimal as it is possible to store excess energy that is not consumed during the daytime and then use it during the night hours. A photovoltaic system correctly sized can therefore make the independent consumption (not purchased) from the electricity grid .

Remote Control App:

Thanks to WiFi module included it is possible to monitor the photovoltaic system and control consumption remotely , via the Apps:

• SOLARMAN Smart (Download: iOS / Android / Web App ), for private and domestic use;
• SOLARMAN Business (Download: iOS / Android / Web App ), for corporate use, with the possibility of having a centralized view of all the systems created and issuing authorizations to the end user for access to the system.
  Once logged in, to add one or more systems follow the guided procedure for initializing a new system, press + button.

Accessories included:

• 3 x Pair of MC4 Solar Connectors for Photovoltaic Cables
• 1 x Current Transformer (TA/CT) for Current Measurement
• 1 x 2.4GHz WiFi Antenna Module Data Logger for Inverter Remote Control